Switch Board Matting
Roll Sizes:
- Type I, Class 2: (1/4″ thickness)
- Corrugated: 24″ x 75′, 30″ x 75′, 36″ x 75′, 48″ x 75′
- Type II, Class 1: (3/16″ thickness)
- Corrugated:24″ x 75′, 36″ x 75′
- Type II, Class 2: (1/4″ thickness)
- Corrugated: 24″ x 75′, 30″ x 75′, 36″ x 75′, 48″ x 75′
- Diamond Tread: 24″ x 75′, 36″ x 75′, 48″ x 75′ (Yellow Borders available in 36″)
- Type II, Class 3: (3/8″ thickness)
- Corrugated: 36″ x 75′
- Type II, Class 4: (1/2″ thickness)
- Corrugated: 36″ x 30′
- Type I, Class 2: (1/4″ thickness)
Proof Tested Over Entire Surface at 20,000 VAC
Recommended Maximum Use Voltage 17,000 VAC - Type II, Class 1: (3/16″ thickness)
Proof Tested Over Entire Surface at 10,000 VAC
Recommended Maximum Use Voltage 7,500 VAC - Type II, Class 2: (1/4″ thickness)
Proof Tested Over Entire Surface at 20,000 VAC
Recommended Maximum Use Voltage 17,000 VAC - Type II, Class 3: (3/8″ thickness)
Proof Tested Over Entire Surface at 30,000 VAC
Recommended Maximum Use Voltage 26,500 VAC - Type II, Class 4: (1/2″ thickness)
Proof Tested Over Entire Surface at 40,000 VAC
Recommended Maximum Use Voltage 36,000 VAC
Type I is defined as
“…made of any elastomer or combination of elastomer
compounds, properly vulcanized.”
Type II is defined as
“…made of any elastomer or combination of elastomeric
compounds with…the following special properties…Ozone
Resistance…Flame Resistance and Oil Resistance…”
Tolerance:
Thickness:
Material:
Backing:
Face Weight:
